Call us on 02392 006118 for sales & support

Search on Knowledge Base
Systemline: Can I disable gesture control on the E50?
4 Jul 2016 by Craig Walker

To disable gesture control

 

 

The E50 is shipped with gesture control enabled. In some installations gesture control may not be required. In order to enable/disable gesture control:

  1. Make sure that the E50 is in standby mode. Press and hold the standby and source keys at the same time until the white and green LEDs are illuminated.

    DO NOT PRESS ANY BUTTONS. WAIT 2 SECONDS.

  2. To disable gestures press the volume down key to extinguish all the white LEDs.

  3. To enable gestures press the volume up key to light all the white LEDs.

  4. Press the standby key to save the current setting. 

Back to top